Received Data Transfer Function (Function Code 53) (Fax Model Only) - Brother 09055CDN Service Manual

1.4.15 Received data transfer function (Function code 53) (FAX model only)

<Function>
This function transfers received FAX data to another machine. It is useful when the machine
cannot print received data due to the printing mechanism being defective. It also transfers the
maintenance information of the machine via FAX.
Note:
- This function transfers received FAX file to another machine. It is useful when the
machine cannot print received FAX file due to the printing mechanism being defective.
- If there are both color and monochrome data in a FAX file to be transferred, the
monochrome data will be transferred first. If the receiver machine does not support the
color function, the sender machine cannot transfer color data, resulting in an error.
<Operating procedure>
(1) Press the 5 and 3 buttons in this order in the initial state of the maintenance mode.
The "FAX TRANSFER" appears on the LCD.
- To check the number of received files, press the 1 button. The "1.NO. OF JOBS"
appears on the LCD.Press the OK button, and the number of received files appears,
just as "NO. OF. JOBS: 10."
- To transfer the activity report only, press the 2 button. The "2.ACTIVITY" appears on
the LCD.
- To transfer received files (together with the activity report), press the 3 button.
The "3.DOCUMENTS" appears on the LCD. Note that if there is no received file, the
"NO DOCUMENTS" appears.
- To transfer the communication list for the latest communication, press the 4 button.
The "4.COM.LIST (NEW)" appears.
- To transfer the communication list for last three errors, press the 5 button.
The "5.COM.LIST (ERR3)" appears on the LCD.
- To transfer the maintenance information (the list in Function code 77), press the 6
button. The "6.MNT77 LIST" appears on the LCD.
(2) With the "2.ACTIVITY," "3.DOCUMENTS," "4.COM.LIST (NEW)," "5.COM.LIST (ERR3)"
or "6.MNT77 LIST" being displayed, press the OK button. The "ENTER NO & SET"
appears on the LCD.
(3) Enter the telephone number of the receiver machine and press the OK button again.
(4) The machine displays the "ACCEPTED" for approximately two seconds and starts dialing
to transfer data.
Note:
- Be sure to type the telephone number with the numerical buttons. No one-touch dialing is
allowed in this procedure.
- No station ID will be attached. A cover page and end page as shown on the
will be automatically attached, instead.
5-36
next page
Confidential