Eeprom Customizing (User-Accessible) (Function Code 52) - Brother 09055CDN Service Manual

1.4.14 EEPROM customizing (User-accessible) (Function code 52)

<Function>
This function allows users to customize the EEPROM settings such as language, function
settings or worker switch settings.
Note:
This function is applicable to France and surrounding countries, Pan-Nordic, East
Europe, Oceania and Iberia areas only.
<Operating procedure>
Non Touch panel model
(1) Press the Menu, Start/Black and Menu buttons in this order in the ready state.
The "0" will appear on the LCD.
(2) Press the 5 and 2 buttons in this order. The "Set Country/Press OK" will appear on the
LCD.
(3) Press the OK button. The country name will appear on the LCD.
Touch panel model
(1) Press the 5 and 2 buttons in this order in the initial state of the maintenance mode.
"Set Country" will appear on the LCD, and the corresponding country names shown in the
table below will appear under "Set Country".
(2) Press the country name of the user. The setting is saved, and the machine returns to the
ready state.
Note:
The country name indicated on the LCD varies depending on the area (code input in
Function code
France and
surrounding
countries
France
België /
Belgique
Nederland
(3) Press the
the OK button while the country name is being indicated. The EEPROM is customized,
and the machine returns to the ready state.
74) as shown in the table below.
Oceania
Australia Norge
New Zealand Suerige
Suomi
Danmark
Others
or button to display the country name where the machine is used. Press
Pan-Nordic Iberia
España
Portugal
5-35
East Europe
österreich
Ceska
republika
Magyarorazág
Polska
Rom nia
â
Slovensko
Others
Confidential