Brother 09055CDN Service Manual page 314

■ Legal model
(1) Remove the Screw pan (S/P washer) M3.5x6 screw to remove the NCU FG harness
ASSY from the Main body.
(2) Disconnect the Connector (CN9) from the Main PCB ASSY.
(3) Disconnect the wiring from the Main PCB ASSY.
NCU FG harness ASSY
Screw pan (S/P washer) M3.5x6
(4) Remove the eight Taptite bind B M4x12 screws and two Taptite cup S M3x6 SR screws
from the Joint cover top.
Taptite cup S M3x6 SR
Taptite bind B M4x12
Taptite bind B M4x12
Main body
Connector
Main PCB ASSY
Fig. 3-185
Taptite bind B M4x12
Fig. 3-186
3-131
CN9
Taptite cup S M3x6 SR
Taptite bind B M4x12
Joint cover top
<Front>
Confidential