Touch Panel Models - Brother DCP-7080 Service Manual

Hide thumbs Also See for DCP-7080:
Table of Contents

Advertisement

3.2.2 Touch panel models

Error Messages
Upper line
Access Denied
Cartridge Error
Cooling Down
Cover is Open
Document Jam
Drum !
Failed to Set
Jam 2-sided
Lower line
Function Locked
Function Locked. Job
Deleted. Press Stop
[X].
Put the Toner
Cartridge back in.
Wait for a while
Close the ADF Cover.
Close the Front Cover. The front cover sensor detected
Close the Back Cover
of the machine.
Make sure there is no
paper jammed inside
the machine and close
the Back Cover, then
press [Retry].
Open the ADF cover
and clear the scanner
jam, then press
Stop[x].
Open the Front Cover
and slide the green tab
across the Drum Unit
several times.
Make sure the phone
line is connected. If
connection fails, call
phone service
company. Press
stop[x] if you do not
connect a phone line.
Pull out the 2-sided
Tray and remove the
jammed paper.
2-23
Description
Failed in print limit ID
authentification on PC print or PC
print is forbidden.
Failed in print limit ID
authentification on Secure print or
PC print is forbidden.
The new toner sensor could not
detect the new toner cartridge
correctly.
The side thermistor of the fuser
unit or the internal temperature
sensor detected a temperature
higher than the specified value.
The ADF cover sensor detected
that the ADF cover was open.
that the front cover was open.
The eject sensor detected that the
fuser cover was open.
The eject sensor was ON when the
power switch was turned ON.
The first side document scanning
position sensor detected that the
document length was 90 cm or
longer while scanning the
document.
The first side document scanning
position sensor has not detected
the top of the document even after
the document has been fed for the
specified distance.
Detected discharge that may be
attributable to dirty corona wire on
the drum unit.
Completed auto-detect as line cord
remained connected to the
external terminal.
The registration front sensor does
not detect paper pass within the
specified time after the first side
was printed in duplex printing
mode.
Error
Refer
codes
to:
---
2-85
---
2-85
4F01
2-39
6801
2-41
A400
2-51
6001
2-40
6004
2-40
7C00
2-46
A200
2-50
A300
2-51
6A00
2-43
---
2-94
7700
2-46
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents