10 ] Update The Paper Feeding Correction Value (Function Code 58); 11 ] Align Vertical Print Lines (Function Code 65); 12 ] Adjust Margins In Borderless Printing (Function Code 66); 13 ] Print Out An Adf Copy Chart And Make A Copy Of That Chart In Adf Scanning (For Models With Adf) - Brother DCP375CW Service Manual

Injet dcp/mfc
Hide thumbs Also See for DCP375CW:
Table of Contents

Advertisement

TIP: Models equipped with a numerical keypad on the control panel can enter the
maintenance mode in the same way as conventional models; that is, by pressing the Menu,
*, 2, 8, 6 and 4 keys in this sequence.
The
machine
"
the maintenance mode, a mode in which the machine is ready to accept entry from the keys.
(2) Press the 8 and 0 keys in this order. (For models without numerical keypad, enter 8 and 0 in
this order using the
(3) Press the Black Start (Mono Start) key several times until the purge (or flushing) count
appears on the LCD.
(4) Press the 2, 7, 8, and 3 keys in this order to reset the purge (or flushing) count. (For models
without numerical keypad, enter 2, 7, 8, and 3 in this order using the
(5) Press the Stop/Exit key to return to the initial stage of the maintenance mode.
(6) Press the 9 key twice to exit from the maintenance mode. (For models without numerical
keypad, enter 9 twice using the

[ 10 ] Update the paper feeding correction value (Function code 58)

Refer to
Section 7.2, [ 5

[ 11 ] Align vertical print lines (Function code 65)

Refer to
Section 7.2, [ 6

[ 12 ] Adjust margins in borderless printing (Function code 66)

Refer to
Section 7.2, [ 7
[ 13 ] Print out an ADF copy chart and make a copy of that chart in ADF scanning (For
models with ADF)
Refer to
Section 7.4 [ 1

[ 14 ] Check LCD operation and specify the LCD type (Function code 12)

Refer to
Chapter 9, Section

[ 15 ] Adjust the touch panel (Function code 78) (For models with touch panel)

Refer to
Chapter 9, Section

[ 16 ] Print out a total quality check pattern

Refer to
Section 7.2, [ 8

[ 17 ] Switch back to standby

Refer to
Section 7.2, [ 9
beeps
for
approx.
" on the LCD, indicating that it is placed in the initial stage of
,
and OK keys.)
,
and OK keys.)
].
].
].
].
9.4.6.
9.4.28.
].
].
7-35
one
second
(MFC
only)
and
displays
,
and OK keys.)
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents