Brother DCP375CW Service Manual page 396

DCPJ140W
(1) Enter 6, 5, and 1 in this order using the
maintenance mode.
The machine displays "PRINTING" on the LCD and prints vertial alignment check pattern
B of rows (A) to (D) (see
through #9 blocks.
The "A NO. (1-9)" appears on the LCD.
(2) Check the (A) row, find which number block shows most indistinct vertical lines, and then
enter that block number using the
The "B NO. (1-9)" appears on the LCD.
(3) Check the (B) row, find which number block shows most indistinct vertical lines, and then
enter that block number using the
The "C NO. (1-9)" appears on the LCD.
(4) In the same way, enter the block number of most indistinct vertical lines for the (C) and (D)
rows.
The machine automatically returns to the initial stage of the maintenance mode.
NOTE: If #1 or #9 block is fully aligned so that you enter 1 or 9 using the
in the above procedure, the machine shows "PRINTING" on the LCD and prints the vertical
alignment check pattern again. Go back to step (2) and make adjustments again.
,
for a sample printout). Each of the rows consists of #1
page 9-47
, and OK keys.
, and OK keys.
9-44
and OK keys in the initial stage of the
, and OK keys
Confidential