Brother DCP375CW Service Manual page 207

For models with ADF, remove the document sponge ASSY using the following steps.
(5) Pull the two right-hand retainers on the ADF unit outwards and release the two right-hand
tabs of the document sponge ASSY.
(6) While slightly warping the document sponge ASSY, release the left rear tab of the
document sponge ASSY from the retainer. Then remove the ASSY from the ADF &
document cover ASSY.
Thin
Document sponge
ASSY
Retainer
Assembling Note: When mounting the document sponge ASSY, orient it so that the thin
end faces to the left. First insert the left front tab into the retainer provided on the ADF unit
and then insert the left rear tab while warping the document sponge ASSY. Next push down
the right side of the document sponge ASSY into place.
Document cover
Tab
6-14
Document sponge ASSY
Thick
(Front)
Right-hand retainers
on the ADF unit
ADF & document cover ASSY
(Right)
(6_17)
Confidential