Brother DCP-7080 Service Manual page 186

7) Fold the other end of the second side CIS flat cable at 751 mm away from the main
PCB side.
Main PCB
side
Electrode
(3) Release the hooks to remove the ejection roller bushing.
(4) Release the lock of the conductive bushing to remove the document ejection roller
ASSY from the lower document chute ASSY.
Hooks
Document ejection roller ASSY
Conductive bushing
Mountain fold
Valley fold
751 mm
Second side CIS flat cable
Fig. 3-46
Ejection roller bushing
Lower document chute ASSY
Fig. 3-47
3-53
45°
Reinforcing tape
The edge of the reinforcing tape
Lock
Conductive
bushing
Confidential