Brother DCP-7080 Service Manual page 226

(5) Remove the taptite cup S M3x8 SR screw to remove the motor plate calking ASSY and
the drum idle gear 68R from the motor drive sub ASSY.
(6) Remove the three screw bind M3x4 screws to remove the main motor from the motor
plate calking ASSY.
Screw bind M3x4
Taptite cup S M3x8 SR
Assembling Note:
• When assembling the motor plate calking ASSY, set the drum idle gear 68R and the
develop gear 65L/34 to the motor plate calking ASSY as shown in the figure below, and
then attach it to the motor drive sub ASSY.
Motor plate calking ASSY
Main motor
Motor plate calking ASSY
Drum idle gear 68R
Motor drive sub ASSY
Fig. 3-98
Motor drive sub ASSY
Develop gear 65L/34
Drum idle gear 68R
Fig. 3-99
3-93
Confidential