Brother DCP-7080 Service Manual page 171

(3) Open the ADF unit. Release the hook of the FFC holder ASSY, then slide it in the
direction of the arrow to release the claws. Remove the FFC holder ASSY from the
document scanner unit.
(4) Lift the ADF unit, and remove the ADF unit from the document scanner unit while
pushing the hook of the hinge R. Pull out the second side CIS flat cable from the flat
core, and pull out the ADF harness unit from the hole.
ADF harness
unit
Hole
Hook
Claws
FFC holder ASSY
Harness routing: Refer to
Assembling Note:
• If you replaced the ADF unit, refer to
SECOND SIDE CIS UNIT" in Chapter 4
ADF unit
FFC holder ASSY
Flat core
Fig. 3-26
"12. ADF unit - Main PCB
"6. IF YOU REPLACE THE ADF UNIT OR
to configure settings.
3-38
Hinge R
Hook
Document scanner unit
Second side CIS flat cable
ASSY".
Confidential