Turn On The Image Orbiter; Trigger The Screen-Saving Video Pattern Periodically; Activate Energy Save To Reduce Power Usage - Pioneer PDP-5020FD - 1080p KURO Plasma HDTV Operating Instructions Manual

Basic Operations For Television Viewing

3.6.3 Turn On the Image Orbiter

A built-in feature to protect against burn-in is the Orbiter function. Orbiter automatically changes the position of
the picture imperceptibly while the image is on screen. To activate the Orbiter, follow the steps below. To cancel
this function, select Off in Step 3.
Option
1 ) Access the
Orbiter from the Option menu.
2 ) Select
Mode 1
3 ) Select or
• AV source Mode 1: for any screen mode except Dot by Dot
• AV source Mode 2: for all available screen modes
• PC source Mode 1: to enable Orbiter
• PC source Mode 2: to smooth the text/character appearance
4 ) Press HOME MENU to exit the menu.
Note: The farthest edges of an image may be hidden at times as the picture position shifts. Also, when the Orbiter
function is set to Mode 1 or Mode 2, the image may appear to drop slightly on the screen.

3.6.4 Trigger the Screen-Saving Video Pattern Periodically

The Video Pattern function causes the screen to appear white, which helps to alleviate after-image ghosts or burn-
in. While the Video Pattern screen is on, only the remote's TV ( a ) button and the panel's STANDBY/ON button
are available. The panel automatically switches to Standby one hour after running the Video Pattern screen. To
cancel the Video Pattern screen, press the remote's TV ( a ) or press the panel's STANDBY/ON.
To activate the Video Pattern screen, follow the steps below.
1 ) Access the Option
2 ) Select Video Pattern
A confirmation screen appears.
Start
3 ) Select from the submenu.
The Video Pattern screen appears.
4 ) Leave the panel alone for a minimum of one hour.
Note: The Video Pattern timer has priority over Sleep Timer, No Signal off, and No Power off (Power Management )
settings.

3.6.5 Activate Energy Save to Reduce Power Usage

The Energy Save option decreases picture brightness and lowers power consumption. The recommended setting,
Energy Save Mode 1, extends the life of your panel while keeping power usage at a minimum.
Follow the steps below to activate an Energy Save option.
1 ) Access the Power Control
2 ) Select Energy Save
3 ) Select an option from the Energy Save submenu.
Off
Mode 1
Mode 2
4 ) Press HOME MENU to exit the menu.
Setup
through the .
Mode 2.
through the Setup .
from the Option menu.
through the Setup
from the menu.
Option
No effect
consumes less power than Off
consumes less power than Mode 1
.
Description
03
53
En