Viewing Multiple Servers Using The Scan Mode; Scanning Your Servers - Dell PowerEdge KVM 1081AD User Manual

2 Set Acceleration to 1.0.
3 Apply the changes and use the Align Local Cursor/Mouse button in the
Viewer to resynchronize the mouse.

Viewing Multiple Servers Using the Scan Mode

The Viewer allows you to simultaneously view multiple servers through the
Thumbnail Viewer of the Scan mode. This view contains a series of
thumbnail frames, each containing a small, scaled, non-interactive version of
a server's screen image. The server name displays below each thumbnail as
well as the status indicator.

Scanning Your Servers

Using the Thumbnail Viewer, you can set up a scan sequence of up to 16
servers to monitor your servers. The scan mode moves from one thumbnail
image to the next, logging into a server and displaying an updated server
image for a user-specified length of time (View Time Per Server), before
logging out of that server and moving on to the next thumbnail image. You
can also specify a scan delay between thumbnails (Time Between Servers).
During the delay, you will see the last thumbnail image for all servers in the
scan sequence, though you won't be logged into any servers.
An indicator light at the bottom of each frame displays the status of the
server. The default thumbnail size is based on the number of servers in the
scan list.
Using the Viewer
77