Activating Ta/Pty Standby Reception - Kenwood KDV-5241U Instruction Manual

3
Select a PTY code.
You can select a PTY code from the
29 preset PTY codes or from the six
stored PTY codes.
• To store your favorite programme types, see the
following.
4
Start searching for your favorite programme.
If there is a station broadcasting a programme
of the same PTY code as you have selected, that
station is tuned in.
Storing your favorite programme types
You can store six favorite programme types.
• When appears on the display, you can
move back to the previous display by pressing
number button 3.
1
2
Select "Memory".
3
Select a preset number ("Preset1"–
"Preset6") you want to store into.
14 | KDV-5241U
4
Select one of the PTY codes.
5
Store the selected PTY code.
Ex.: When "Classics" is selected in step
6
Repeat steps 3 to 5 to store other PTY codes
into other preset numbers.
7
Exit from the setting.
Activating TA/PTY Standby
Reception
TA Standby Reception
either lights up or flashes on the display.
• If lights up, the unit temporarily will switch to
Traffic Announcement (TA), if available, from any
source other than AM.
The volume changes to the preset TI volume level if
the current level is lower than the preset level (see
page 38).
• If flashes, TA Standby reception is not yet
activated. Tune in to another station providing the
RDS signals.
To deactivate TA Standby Reception, press TP
again. goes off.
4