Table of Contents
Advertisement
When correcting settings of distances manually
1
2
3
4
• When you purchased, this has been set in the Automatic Correction mode. The Automatic
Correction works while driving.
• Even after automatic correction is finished, owing to the learning function, the movement of the
current position mark can change depending on driving conditions.
• When automatic correction is working, manual correction cannot be performed.
• If
is selected on the screen of step 4, automatic correction will be restored.
• You cannot operate when
• If the vehicle marker is incorrect after distance correction, the vehicle speed signal switch may
have been set incorrectly. See the Instruction Manual and change the vehicle speed signal
switch position correctly.
Select
Select
Select
or
: When the vehicle marker moves faster than the
actual vehicle.
: When the vehicle marker moves slower than the
actual vehicle.
Select
.
(Advance) or
(Delay) is highlighted.
.
.
.
English |
51
Advertisement
Table of Contents
