Table of Contents
Advertisement
• Connection for analog recording
Use the separately sold AID converter (BP-A7).
•
Turn off the power to both the amplifier and this unit before making connections.
•
Connect the AID converter unit (supplied in the BP-A71 to this unit.
•
Connect the AID converter unit's [MIC/LINE IN] jack to an amplifier's [TAPE REC] jacks or a
stereo microphone.
•
Connect the AID converter unit's [LINE OUT] jack to an amplifier's external input jacks (AU X
jacks, TAPE PLAY jacks, etc.).
Both input and output connections should be made with the red plug connected to the amplifi-
er's "R" (right channell jack and the white plug connected to the "L" (left channell jack.
•
Use the AID converter unit's [MIC/LlNE] switch to MIC or LINE, depending on the connection.
•
Adjust the playback sound volume using the amplifier's volume control.
•
When using a microphone, use a stereo microphone equipped with a 3.5 mm diameter stereo
miniplug. If you use a monaural microphone, the sound will be recorded on the left channel only.
REC ouT
PLAY BACK
1i:J\
@@
r~H-I------d
Stereo microphone
~~hite
~
. . _=:J
J
~ ~~'\~
MIG/LINE IN
-====")
Separately sold BP-A 7
DX-7
13
Advertisement
Table of Contents
