Last Number Recall; Recalling Last 10 Numbers Dialed; Super Speed Dialing; Turbo Dial - Motorola 4500 Manual

Memory
Press 0, 1 and press # or G to begin
scrolling from the beginning of the stored
locations.
The display will show the location number, then
the first ten digits of the number. If Number
Preferred is not selected, up to seven characters
of the name will display. (Refer to "Number
Preference" on page 41 for more details.)
3. Press S to place a call to the number
displayed.
Use G and H to scroll forward and backward.
To scroll from a specific two-digit location, press
R, then the location number where you wish to
begin scrolling.
The phone will display an apostrophe (') after the
memory location number to indicate that memory
scrolling is active.

Last Number Recall

1. Press R, and the last number entered on
the keypad will appear.
2. Press S to place a call to the last number
displayed.

Recalling Last 10 Numbers Dialed

1. Press R, 0, 0.
The display will show L0' followed by the name or
number of the most recently placed call.
2. Scroll the last ten numbers dialed with *
and #.
3. To place a call to this number, press S.
30
This feature allows you to refer to or redial any of
the last ten numbers to which calls were placed.
The numbers are stored in the order placed and
always represent the ten most recent calls.
Successive calls to the same number are stored
only once, and all are retained when the unit is
shut off.
NOTE When scrolling, you may observe that a
location number is skipped. This may be caused
by pressing S when the display is empty and
does not mean that a number has been lost.

Super Speed Dialing

1. Enter the location number.
2. Press S.
Memory locations 1-99 are equipped with Super
Speed Dialing capability. Once information is
stored in these locations, Super Speed Dialing
allows you to place a call without pressing R.
The number dialed will not display for review.
NOTE Do not attempt the sequence 0 , S . This
will place a call to the local operator.

Turbo Dial

Press and hold for one second any one of
the digit buttons 2 through 9.
The digit buttons 2 through 9 ( 1 is reserved
for Priority Dialing) provide an advanced form of
Super Speed Dialing. Once numbers have been
stored in memory locations 2-9, calls can be
placed from these locations by pressing the
Memory
31