HP Vectra VL6 8 Installation Manual page 7

2 Connecting to a Netware 4.11 Server
Windows for Requirements
Workgroups
• HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.
• IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.04.
• Driver Name: IBMMPC.DOS Size: 60KB Date: 4/4/97
• Novell Netware 4.11 server that supports Net BEUI, NWLink IPX/SPX,
• Netware client for DOS and MS-Windows.
Device Configuration
I/O Address
Procedure
1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR
2 Insert the IBM LANStreamer TR drivers disk 2 (AUTO LANStreamer PCI
3 After the machine boots, verify that the adapter finished testing and that
4 Click on "F3" to exit, and then press "CTRL+ALT+DEL."
5 Boot the machine to a DOS prompt, and Netware client for DOS and MS-
6 Execute INSTALL.EXE and set lines 1-5 as listed below;
and NWLink NetBIOS transfer protocols.
Vectra VL8
Interrupt 11
F800-h
adapter card into a PCI slot.
Diagnostic Disk) and power on the machine.
the adapter is "OK."
Windows disk 1.
C:\NWCLIENT
YES
YES
C:\WINDOWS
2 Connecting to a Netware 4.11 Server
Vectra VL7 Vectra VE7/VE8
11(10) 10(11)
C800h DC00-h
Windows for Workgroups