Setting Up; Using With Acoustic Drums; Power Supply; Connecting Speakers And/Or Headphones - Yamaha DTX-MULTI Owner's Manual

Setting Up

Using with Acoustic Drums

If you intend to use your DTX-MULTI 12 together with a set of
acoustic drums, you can attach an MAT1 Module Attachment
(sold separately) to the bottom of the unit so that it can be conve-
niently assembled to a tom holder or a stand. For details regarding
assembly, refer to the owner's manual that comes with the MAT1.

Power supply

1 F F F F
Ensure that the (Standby/On) switch on the
rear panel is turned off.
2
Connect the DC power cord from the power adap-
tor (included) to the DC IN terminal on the rear
panel. To prevent the cord from being acciden-
tally unplugged, wrap it around the cord clip.
CAUTION
• Ensure that the power cord is not bent at an extreme angle
when wrapped around the clip. Excessive bending can dam-
age the cord and create a fire hazard.
3 Plug the adaptor's AC power cord into an AC wall
socket or another electrical outlet.
WARNING
• Use only the power adaptor provided. Operation with other
adaptors may damage the instrument, cause it to overheat, or
create a fire hazard.
• Ensure that the power supply is correct for the power adaptor
provided.
• The DTX-MULTI 12 remains charged and draws a small
amount of power even when the
the Off position. If it is not to be used for an extended period of
time, therefore, be sure to unplug the AC power adaptor from
the power supply.
10
Owner's Manual
F
(Standby/On) switch is in
Connecting Speakers and/or Head-
phones
The DTX-MULTI 12 has no built-in speakers. In order to hear it,
therefore, you will need to connect headphones or an external
amplifier and speakers. (See the connection diagram below.)
CAUTION
• Whenever making connections, ensure that the plugs on the cables
being used match the DTX-MULTI 12's output jacks.
●
OUTPUT L/MONO and R Jacks
(standard mono audio jacks)
Use these jacks to connect your instrument to an external ampli-
fier and speakers in order to hear yourself play. If the amplifier
has only a single input jack, be sure to connect it via the OUTPUT
L/MONO jack.
●
PHONES Jack (standard stereo audio jack)
Use this audio jack to connect a pair of stereo headphones. The
headphone volume can be adjusted using the VOLUME knob on
the rear panel.
CAUTION
• To prevent hearing loss, avoid using headphones at high volumes
for extended periods of time.

Connecting to Other Audio Equipment

Audio input from an MP3 or CD player via the AUX IN jack can
be mixed with the sound produced by the DTX-MULTI 12 and
output together from the OUTPUT (L/MONO and R) and
PHONES jacks. This makes it very easy to play along with your
favorite tunes. If necessary, furthermore, you can adjust the input
volume using the GAIN knob.
MS100DRJ or MS50DRJ Electronic
Drum Kit Monitor System, etc.
OUTPUT L/MONO and R jacks
AUX IN
Portable music player, etc.
Headphones
PHONES jack
DTX-MULTI 12