Adjusting The Picture; Selecting The Picture Mode; Adjusting The Picture Quality - Toshiba 47TL515U Owner's Manual

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from the
modes described below.
Mode Description
Automatically adjusts picture settings
AutoView ® based on ambient light conditions and
input signal content.
Sports Bright and dynamic picture.
Standard Standard picture settings.
Movie 1
Lower contrast for darkened room.
Movie 2
Designed for playing a video game
requiring split-second timing between
Game
the screen display and input from the
controller.
Designed for the viewing of PC tables
PC
and documents.
Note:
• PC mode is available for HDMI and PC inputs only (not
displayed for other input sources).
• Game mode cannot be turned on when the ANT/CABLE
input is selected.
1
> Settings > PICTURE > Picture Mode.
2
Press C or c to select a mode. Press
Note:
• The picture mode you select affects the current input
only. You can select a different picture mode for each
input.
• The picture mode can be changed to Game mode by
pressing when the input mode is ColorStream HD,
PC, VIDEO, or HDMI.
Chapter 7: Picture and sound controls

Adjusting the picture quality

The adjustments you make to picture quality under a
picture mode are saved to that picture mode.
Selection
Backlight*
Contrast
Brightness
Color
Tint
Sharpness
* Backlight: Adjusts the brightness of the entire screen. When
in video mode and no signal is input, this selection is set to 0.
(Settings are stored in memory.)
Note: Some settings cannot be adjusted in any of the
following cases.
• AutoView is selected.
• TheaterLock is set to On.
To adjust the picture quality:
1
2
Note:
• Any picture settings that you adjust affect the current
input only. You can adjust the picture quality separately
for each input.
. • Depending on a Sharpness value, the Edge Enhancer
effect may be reduced.
To reset to the factory defaults:
1
2
3
Pressing C
darker
lower
darker
paler
reddish
softer
> Settings > PICTURE > the setting you would
like to adjust (Backlight, Contrast, Brightness,
Color, Tint, or Sharpness).
Press C or c to adjust the setting. Press
Select the picture mode you want to reset.
> Settings > PICTURE > Reset >
confirmation screen appears.
Press C or c to select Yes. Press
Pressing c
lighter
higher
lighter
deeper
greenish
sharper
.
. A
O K
.
OK
55