HP 4510s - ProBook - Celeron 1.8 GHz Maintenance And Service Manual page 123

4. Remove the battery (see
5. Remove the following components:
a. Switch cover and keyboard (see
b. Optical drive (see
c. Speakers (see
d. Palm rest (see
e. Top cover (see
Remove the processor:
1. Position the computer right-side up with the front toward you.
2. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise
until you hear a click.
3. Lift the processor (2) straight up and remove it.
NOTE: When you install the processor, the gold triangle (3) on the processor must be aligned
with the triangle (4) embossed on the processor socket.
Reverse this procedure to install the processor.
Battery on page 63).
Switch cover and keyboard on page
Optical drive on page
Speakers on page 73)
Palm rest on page 75)
Top cover on page 90)
69)
Component replacement procedures 111
64)