Basic Operations; Status Led Indications - Brother DCP-395CN User Manual

Chapter 1

Basic Operations

The following steps show how to change a
setting in the machine. In this example the
Paper Type setting is changed from
Plain Paper to Inkjet Paper.
a
Press Menu.
b
Press a or b to choose
General Setup.
General Setup
Network Network
Print Reports Print Reports
Machine Info. Machine Info.
Initial Setup Initial Setup
MENU
Press OK.
c
Press a or b to choose Paper Type.
d
Press d or c to choose Inkjet Paper.
Press OK.
You can see the current setting on the
LCD:
General Setup General Setup
Paper Type Paper Type
Paper Size Paper Size
LCD Settings LCD Settings
Sleep Mode Sleep Mode
MENU
e
Press Stop/Exit.
8
1
Select & Press OK
Inkjet Paper Inkjet Paper
Letter Letter
5 Mins Mins
Select & Press OK

Status LED indications

The Status LED (light emitting diode) is a light
that shows the status of the machine, as
shown in the table.
LED DCP status
Ready
Off
Cover open
Orange
Cannot Print
Paper error
Other
messages
Description
The DCP is ready for
use.
The cover is open. Close
the cover. (See Error
and Maintenance
messages on page 80.)
Replace the ink cartridge
with a new one. (See
Replacing the ink
cartridges on page 87.)
Put paper in the tray or
clear the paper jam.
Check the LCD
message. (See Error
and Maintenance
messages on page 80.)
Check the LCD
message. (See Error
and Maintenance
messages on page 80.)
1