Enhance Photos - Brother DCP-395CN User Manual

PhotoCapture Center
e
Repeat step d until you have entered
all the image numbers that you want to
print.
(For example, enter 1, OK, 3, OK, 6, OK
to print images No.1, No.3 and No.6.)
Note
You can enter up to 12 characters
(including commas) for the image
numbers you want to print.
f
After you have chosen all the image
numbers, press OK again.
g
Press + or - repeatedly to enter the
number of copies you want.
h
Do one of the following:
Change the print settings. (See
page 49.)
If you do not want to change any
settings, press Color Start to print.
®
: Printing photos from a memory card or USB Flash memory drive

Enhance Photos

You can edit and add effects to your photos
and view them on the LCD before printing.
• After adding each effect, you can enlarge
• The Enhance Photos feature is supported
Auto Correct
Auto Correct is available for most photos. The
machine decides the suitable effect for your
photo.
a
b
c
d
e
f
Note
the view of the image by pressing Ink. To
go back to the original size, press Ink
again.
by technology from Reallusion, Inc.
Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
Press (Photo Capture).
Press a or b to choose
Enhance Photos.
Press OK.
Press d or c to choose your photo.
Press OK.
Press a or b to choose Auto Correct.
Press OK.
Note
If Remove Red-Eye appears on the LCD,
press a to attempt to remove red-eye from
your photo.
Press OK. Then press + or - repeatedly
to enter the number of copies you want.
Do one of the following:
Press OK and change the print
settings. (See page 49.)
If you do not want to change any
settings, press Color Start to print.
5
5
5
43