Scan To Image - Brother DCP-8110DN Software User's Manual

Network Scanning

Scan to Image

When you choose Scan to Image, your document will be scanned and sent directly to the computer you
designated on your network. ControlCenter4 or ControlCenter2 will activate the default graphics application
on the designated computer.
For 5-line LCD models
a
Load your document.
b
Press (SCAN).
c
Press a or b to choose Scan to PC.
Press OK.
d
Press a or b to choose Image.
Press OK.
If your machine does not support Duplex Scan, go to step f.
If your machine supports Duplex Scan, go to step e.
e
Press a or b to choose 1sided, 2sided (L)edge or 2sided (S)edge.
Press OK.
f
Press a or b to choose the destination computer you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination computer
on the control panel.
Press OK.
g
Press a or b to choose Start Scan.
Press OK.
h
Press Start.
The machine starts the scanning process.
13
13
13
236