ControlCenter4
Using the OCR feature
The
(OCR) button lets you scan a document and convert it into text. This text can be edited using your
favorite word processing software.
a
Select the Scan tab.
b
If you want to change the scan settings, right-click
to preview and configure the scanned image, check PreScan. Click OK.
c
Click
(OCR).
d
Your default word processing application will open and display the converted text data.
Attaching the scanned data to E-mail
The
(E-mail) button lets you scan a document to your default E-mail application, so you can send the
scanned job as an attachment.
a
Select the Scan tab.
b
If you want to change the scan settings, right-click
want to preview and configure the scanned image, check PreScan. Click OK.
c
Click
(E-mail).
d
Your default E-mail application will open and the image will be attached to a new, blank E-mail.
Note
Webmail services are not supported by Scan to E-mail.
(OCR) and then change your settings. If you want
(E-mail) and then change your settings. If you
4
4
4
91