Sending Or Receiving (For Dcp And Mfc Models) An E-Mail Securely; Configuration Using Web Based Management (Web Browser) - Brother DCP-8110DN Manual

Sending or Receiving (for DCP and MFC
5
models) an E-mail securely

Configuration using Web Based Management (web browser)

You can configure secured E-mail sending with user authentication or E-mail sending and receiving (for DCP
and MFC models) using SSL/TLS on the Web Based Management screen.
a
Start your web browser.
b
Type "http://machine's IP address/" into your browser (where "machine's IP address" is the machine's IP
address).
 For example:
http://192.168.1.2/
c
No password is required by default. Enter a password if you have set one and press
d
Click Network.
e
Click Protocol.
f
Click Advanced Setting of POP3/SMTP and make sure that the status of POP3/SMTP is Enabled.
g
You can configure the POP3/SMTP settings on this page.
Note
• For more information, see the Help text in Web Based Management.
• You can also confirm whether the E-mail settings are correct after configuration by sending a test E-mail.
• If you do not know the POP3/SMTP server settings, please contact your system administrator or ISP
(Internet Service Provider) for details.
h
After configuring, click Submit. The Test E-mail Send Configuration or
Test E-mail Send/Receive Configuration screen appears.
i
Follow the instructions on-screen if you want to test with the current settings.
5
5
5
.
25