HP Workstation x1000 Installation Manual

Hewlett-Packard Company
3404 East Harmony Road
Fort Collins, Colorado 80528
CD-RW Drives Installed in HP Workstation Systems
The CD-RW software for the 12X/8X/32X CD-RW drive that is installed in your HP
Workstation is not included in the pre-loaded software. You must install the Direct
CD and Easy CD Creator applications manually from the Applications CD-ROM
(provided with the Workstation or as an accessory kit) before you can use the write/
re-write functionality of the drive. The installation of these two software applications
must be performed in the following manner:
1. Put the Applications CD-ROM into the CD drive.
2. When the installation window appears, choose the language and then click on
Easy CD Creator and follow the instructions to install this application.
3. When the installation wizard returns, choose Exit and then remove the Applica-
tions CD from the drive. Choose Yes to restart your system.
4. When the system has restarted and you are logged in, repeat steps 1 and 2 above,
this time selecting Direct CD as the application to install.
5. When the installation wizard returns, once again choose Exit, remove the CD
and choose Yes to restart the system.
6. When the system has been restarted the second time, you are ready to use the full
functionality of the CD-RW drive.
If you do not install these two software packages, you can only use the CD-RW
drive's read functionality.
Technical Computer Division
Hewlett-Packard
Read Before Using
Product No. A7212A
Pub. No. A7218-90011