Step 4-Completing Installation; Japanese 日本語 - HP Workstation xw4000 Hardware Installation

4. To mount the workstation into the rack:
a. Place the workstation with the attached tray
b. Slide the workstation into the rack.
c. Use a cross-tip screwdriver to secure the workstation to the rail mounting flanges with two M6
screws
Figure 5
Step 4—Completing installation
1. Reconnect power to the workstation.
2. Restore power to the workstation.
Japanese 日本語
This document is available in Japanese. See http://www.hp.com/support/workstation_manuals, then
select your workstation product and select Japanese from the drop down Manual Language menu.
このドキュメントは日本語版が用意されています。http://www.hp.com/support/workstation_manuals
にアクセスし、ご使用のワークステーション製品を選択し、Manual Language ドロップダウン メニ
ューから Japanese を選択してください。
ENWW
.
Fastening the workstation to the rack
onto the rails in the rack.
2
Step 4—Completing installation 5