Choose The Output Bin; Identify The Output Bins; Select The Output Location - HP Color LaserJet 9500 Administrator's Manual

Choose the output bin

Identify the output bins

The device has two output locations: the stacker bin and the booklet bin.
1
2
The default stacker bin (bin 1) provides 1,000 sheets of stacking capacity and delivers documents face-
up or face-down, depending on which option is selected in the driver.
The booklet bin (bin 2) provides folding and saddle stitching for 40 booklets composed of up to 5 sheets
(20 finished pages) of paper. A stacking guide automatically adjusts to accommodate the size of the
booklet in production.
The stapler serves both bins, and staples as many as 50 sheets of paper per document or 10 pages
per saddle-stitched document.
A sensor causes the printer to stop when the device bins are full. Operation continues when you remove
all media from the bin.
NOTE: Transparencies, envelopes, labels, prepunched paper and cut-sheet paper are supported in
the stacker bin (bin 1).
NOTE: If you print envelopes, remove all envelopes from the bin once the job is complete to maintain
stacking quality.

Select the output location

You can select an output location (bin) through the software application or through your printer driver.
(Where and how you make selections depends on your program or driver.) If you cannot select an output
location from the program or the driver, set the default output location from the printer control panel.
20 Chapter 2 Finisher tasks
Stacker bin (bin 1)
Booklet bin (bin 2)
ENWW