HP Xw4400 - Workstation - 2 GB RAM Hardware Manual page 4

onboard LSI controllers for SAS RAID; details will vary based on the specific configuration (RAID level,
number of disks) used.
Step 1: Boot the workstation, and when prompted, press any key to view option ROM messages. A
message indicating the presence of the LSI onboard controller or plug-in card and the LSI Logic MPT
SAS BIOS will appear.
Figure 1 LSI Logic MPT SAS BIOS
Step 2: Press CTRL-C when indicated to begin RAID configuration and enter the LSI Logic MPT Setup
Utility. The first screen will display a list of available adapters. The LSI 3041E plug-in card appears on
this list as the SAS1064E, the LSI onboard controllers are listed as the LSI1064 or LSI1068. This screen
can be used to change the boot order of the adapters.
4 Installing and Configuring SAS Hardware RAID on HP Workstations ENWW