HP Xw4400 - Workstation - 2 GB RAM Hardware Manual page 9

Figure 9 LSI WebBIOS – Main screen
Step 3: The Configuration Wizard can be used to create a new RAID array on the device. From the
MegaRAID Configuration Wizard screen, there are options available to clear any existing device
configuration, add new drives to an existing configuration, or create a new configuration from scratch.
Clicking on either "New Configuration" or "Add Configuration" proceeds to the next step of the wizard,
where there are options for either custom or automatic configurations.
Figure 10 LSI WebBIOS – Configuration wizard
Step 4: Automatic configurations will automatically add all available disks to a RAID array, with the RAID
level determined by whether or not redundancy is selected. Custom configuration allows the user to
select disks, array size, and RAID level. The next screen allows for the selection of the disks which will
ENWW LSI 8344ELP and LSI 8888ELP Setup 9