Installing Hp Information Assistant Software; Installing From The Cd-Rom - HP D5970A - NetServer - LCII User Manual

Chapter 2
After selecting the print option, a Print Setup box or Print dialog box appears. In
the Print dialog box, you can choose from several options: number of copies to
print, collate, print quality (dots per inch, and print to a file.) In the Print Setup
box, you can select a printer, the page orientation, and the type or source of paper
on which to print.

Installing HP Information Assistant Software

HP Information Assistant runs on an HP Vectra or other PC running Windows 3.1
and above, Windows 95 or Windows NT. HP Information Assistant can be
installed in one of two ways:
From the CD-ROM
From a Network Server on which the HP Information Assistant application
files are installed
The installation program gives you the option of accessing the data files from your
hard disk or from the CD-ROM. The default is to access the data files from the
CD-ROM. You can copy the data files to your hard disk to improve access time,
but this could take up a significant amount of disk space.

Installing from the CD-ROM

To install HP Information Assistant from the HP NetServer Navigator CD-ROM,
do the following:
1. Turn on your computer and CD-ROM drive.
2. Run Windows and display the Program Manager.
3. Insert the HP NetServer Navigator CD-ROM into the CD-ROM drive.
4. From Program Manager, select the File menu and choose "Run."
5. At the command prompt, type the following:
{drive}:\infoasst\setup /a
where {drive} is the letter of the CD-ROM drive.
6. Follow the instructions that appear on your screen.
In Program Manager, the Setup Program creates a new program group called HP
NetServer Information Assistant, with an icon for running the application.
10
HP NetServer Information Assistant