Pioneer SPH-DA02 Operation Manual page 29

Appendix
Symptom
There is no GPS signal.
Problems with the audio screen
Symptom
iPhone cannot be operated.
Problems with the phone screen
Symptom
Dialing is not possible because
the touch panel keys for dialing
are inactive.
Cause
The GPS antenna is in an unsuitable
location.
Obstacles are blocking signals from
the satellites.
The position of satellites relative to
your vehicle is inadequate.
Signals from the GPS satellites have
been modified to reduce accuracy.
(GPS satellites are operated by the
US Department of Defense, and the
US government reserves the right to
distort positioning data for military
reasons. This may lead to greater
positioning errors.)
If a vehicle phone or cellular phone
is used near the GPS antenna, GPS
reception may be lost temporarily.
Something covers the GPS antenna. Do not cover the GPS antenna with spray
Cause
The iPhone is frozen.
An error has occurred.
Cause
Your phone is out of range for ser-
vice.
The connection between the iPhone
and this product cannot be estab-
lished now.
Action (Reference)
The quality of signals from the GPS satellites
is poor, causing reduced positioning accu-
racy. Check the GPS signal reception and the
position of the GPS antenna if necessary.
The quality of signals from the GPS satellites
is poor, causing reduced positioning accu-
racy. Check the GPS signal reception and the
position of the GPS antenna if necessary, or
continue driving until reception improves.
Keep the antenna clean.
The quality of signals from the GPS satellites
is poor, causing reduced positioning accu-
racy. Continue driving until reception im-
proves.
The quality of signals from the GPS satellites
is poor, causing reduced positioning accu-
racy. Continue driving until reception im-
proves.
The quality of signals from the GPS satellites
is poor, causing reduced positioning accu-
racy. When using a cellular phone, keep the
antenna of the cellular phone away from the
GPS antenna.
paint or vehicle wax, because this may block
the reception of GPS signals. Snow buildup
can also degrade the signals.
Action (Reference)
Reconnect the iPhone with the iPhone cable.
! Reconnect the iPhone with the iPhone
cable.
! Press the Reset button.
Action (Reference)
Retry after re-entering the range for service.
Perform the connection process.
Appendix
29
En