HP D6030A - NetServer - E50 Getting Started page 24

Chapter 4
Figure 4-8. Tape Drive Selection Window
IMPORTANT In the Tape Drive Selection window, the HP SureStore T4 tape
drive is identified as an HP T4000s drive. Only SureStore
drives with the T4000 designation will work with Replica.
4. Choose a tape drive from the menu of available tape drives, then
click Next.
NOTE If the tape in the selected drive contains data from a previous
Replica backup, the Wizard asks you to confirm the
overwriting of the data based upon the new configuration.
The Wizard displays the Volume Selection window listing HP NetServer
volumes that are available for backup.
20
Configuring An Automatic Backup