Step 8: Replace I/O Fans - HP D7171A - NetServer - LPr Upgrade Manual

Chapter 2

Step 8: Replace I/O Fans

The two I/O fan modules are identical. Replace them as follows:
1. Orient one I/O fan to the accessory board guide, as shown in Figure 2-10.
Accessory Board Guide
I/O Fan
I/O Fan
Figure 2-10. Insert Fan Assemblies (Shown for Pedestal Configuration)
2. Insert the fan module and press it firmly into the connector.
3. Repeat Steps 1 and 2 for the other I/O fan.
Installation
19