HP D7171A - NetServer - LPr User Manual page 32

Appendix B
5. Press the Enter key when you have selected the desired option.
The Slot Options popup menu disappears and displays the popup menus in
Figure 20, titled:
Driver Is Loaded – Next Step
NOTE The driver is removed from control of the PCI slot, but not
from the list of drivers held in the HP NetServer under
NetWare 5.
6. Select Yes in the pop-up menu. See Figure 20.
à
If the PCI board is a Disk Drive Controller, with various drives
connected to it and operating, a screen appears concerning dismounting
the disk drives. See Figure 21.
à
If the PCI board type is not a Disk Drive Controller, the pop-up menu
disappears and the main menu remains, but the slot's status (slot P5)
changes from "Ready" to Powered Off. See Figure 22 and skip to Step
8.
28
Warranty, Software License and Support
Figure 20. Driver Is Loaded Screen