HP D7171A - NetServer - LPr Installation Manual page 9

Chapter 1
NOTE Some of the product numbers are duplicated, because the type
of drive shipped is not always the same. Therefore, it is
important that you match your drive to the correct type.
The types of drives differ in that the jumpers are in different locations. Refer to the
appropriate illustration (Figure 1-2, 1-3, 1-4, 1-5 or 1-6) for your type of drive,
and note the location of the jumpers.
The "Disk Drive Characteristics" appendix shows a legend of the drive control
settings and the jumper control settings for the individual drives.
J6
Figure 1-2. Component Identification, Type 1 Drives
Prepare Drive for Installation
J2
SCSI Connector
J1
Power Connector
5