Removing The Covers (Lh 3X); Removing The Covers (Lh 3R); Memory; Cover 1 Cover - HP D7171A - NetServer - LPr Reference Manual

Removing the Covers (LH 3X)

Cover 1

Removing the Covers (LH 3r)

Memory

There are four DIMM sockets on the system board for memory expansion. You can use 64 MB, 128 MB, and 256 MB
DIMMs for a maximum capacity of 1 GB of RAM.
The minimum memory configuration for the NetServer LH 3/LH 3r is one 128 MB DIMM.
The system board DIMM sockets are numbered from 0 to 3.
DIMMs may be installed in any quantity and in any DIMM socket on the system board. DIMMs that differ in
capacity can be mixed.
CAUTION Do not rock the DIMM into place, but apply firm and even pressure directly downward. If the
retaining clips do not close, remove the module and repeat Steps 3 through 5.
Cover 3
Cover 2
Cover 2
Cover 1
Cover 1
Cover 3
Cover 2
Cover 3
3