HP NetServer LXr Pro with A3661B High Availability Disk Array Model 30/FC Cluster Configuration Guide July 31, 1998 Introduction This document defines the supported HP NetServer LXr Pro with HP A3661B High Availability Disk Array Model 30/FC (LXr Pro/ Model 30-FC) configurations for Microsoft Cluster Server. These configurations minimize single points of failure and provide maximum availability.
System software: Navigator version G.01.00 or later Operating System Microsoft Windows NT Server 4.0, Enterprise Edition or later Service pack SP 3 and hotfix "clusfixi", or later Model HP NetServer LXr Pro Model 1 Clock speed 200 MHz. or faster No.
Shared Storage Host Bus Adapter: Model A5246A HP Fibre Channel Adapter Kit for NT No. of HBA 1-2 (See Shared Storage Configurations.) Driver version 2.09.B.038.020 SPU I/O slot P6 (1 HBA) and P5 (2 HBA) Disk Array Controller: Model SP630/FC Storage Processor (ordered with A3661B or A3662B) No.
Page 4
Disk Arrays (See Shared Storage: No. of Disk Arrays No. of Controllers 1 per Disk Array for Basic Configuration. 2 per Disk Array for Redundant Configuration.
Page 5
See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. Port connections to this hub are for example only. You can use any port, except for port 10 on Long Wave Hubs. The remaining ports can be used for connection of additional Disk Arrays.
Page 6
See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. See Shared Storage Cables for a list of cables that can be Port connections to connected between these hubs are for hubs.
Page 7
See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. Port connections to these hubs are for example only. You can use any port, except for port 10 on Long Wave Hubs.
Page 8
See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. See Shared Storage Cables for a list of cables that can be connected Port connections to between hubs. these hubs are for Port 10 is used example only.