HP D7171A - NetServer - LPr Manual page 3

RAID level
Cabinet
RAID arrays
No. of cabinets
FC Array Cards
Model
No. of cards/cabinet
Firmware
FC Array Assistant
Status SCSI ID
Disk SCSI IDs
Disk drives:
Fibre-channel cables
Hub
Model
Quantity
HP Rack Storage/12
Number of cabinets:
Model
Status SCSI ID
Disk SCSI IDs
Disk drives:
Cables
LANs
LAN connection
0, 1, 3, 5, 10
For SPOFless configurations, a fault-tolerant RAID type, e.g. RAID 5, is
recommended for all shared storage.
HP Rack Storage 12/FC – D5991A
Not more than 8 physical drives per logical array and not more than 8
LUNs are permitted per cluster.
1
HP Fibre Channel Array Controller - D5990A
2 (Requires second card be installed in the Rack Storage/12FC.)
5.46-04 (Navigator L.18.04.5 or later)
A.002-5
5 (fixed)
0 – 3, 8 – 15 (fixed)
Any HP drive supported by storage enclosure
Optical (Server to Hub only):
50 meter D6980A
100 meter D6981A
Copper (Shared Storage to Hub and Server to Hub ):
3 meter D6978A
5 meter D6979A
10 meter D7080A
HP D6976A 6-port fibre channel
Or HP P4459A 8-port switch
1 for SPOF
2 for SPOFless with hubs
Optional
1 – 2
HP Rack Storage/12 – D5989B or C plus two D6025B or two D6025C
SCSI cards for each cabinet
5 (fixed)
0 – 3, 8 – 15 (fixed)
Same as HP Rack Storage/12FC
Any HP LVD SCSI cables from the following list:
1 meter D7131A
2.5 meter D6020A
5 meter D6982A
10 meter D6983A
Intra-cluster (Heartbeat) LAN
HP D5954A crossover cable or
equivalent
The intra-cluster LAN may only be
used for cluster node communication
via a crossover cable or VLAN. It
3
Client LAN
Any LAN