Installing Power Supplies; Installing Memory - HP D7171A - NetServer - LPr Installation Manual

Installing Power Supplies

WARNING Always insert the power supply filler panel into an
empty power supply bay. Operating with an empty
bay could cause thermal damage to the Nerserver.

Installing Memory

CAUTION Use only HP PC133 MHZ buffered SDRAM DIMMs.
WARNING DIMMs can be damaged by improper handling.
Always use an anti-static wrist strap and
grounding mat, and discharge static electricity
before touching DIMMs.
Keys
DIMM Slot
Retaining Latches (2)
Notches
30 Degrees
Installing Memory (Continued)
System Board
Installing the PCI Accessory Board
64-bit PCI Slot (1)
I C
2
Connector
DIMM Slots
0
1
2
3
System Board
1
2