Bobbin Work Free-Motion Sewing - Brother Laura Ashley Innov-ís NX2000 Operation Manual

Bobbin Work Free-Motion Sewing

Note
• For bobbin work free motion sewing use the
instructions for "CREATING BOBBIN WORK"
beginning on page 8.
• Use the quilting foot provided with your machine. If
you do not have a quilting foot, contact your nearest
authorized dealer to purchase. For details on using
the quilting foot, refer to the Operation Manual
provided with your machine or with the presser foot.
If so desired, use a template or draw your design on the
stabilizer to allow for ease of stitching. Remember, your
stitches with your decorative thread will be on the
underneath side of your fabric and the stabilizer will be
on the top of the wrong side of your fabric.
The CD-ROM included with this kit contains template
data for free-motion sewing. For a list of the template
designs, refer to "Templates for Free-Motion Sewing"
on page 12.
a
Print the desired template.
Note
• Print the template in its original dimensions. If an
enlarged template is used, the bobbin thread may
run out during sewing.
b
Affix the stabilizer to the wrong side of the
fabric.
c
Place commercially available transfer paper
on the stabilizer, then the paper printed with
the template on top, and then trace the design
with a pencil.
a
Template
b Transfer paper
c
Stabilizer on wrong side of fabric
Note
• Some templates have the arrows to show you the
sewing direction. Trace the arrows with design.
d
Once the design is transferred to the stabilizer,
position the fabric under the free-motion
presser foot on the machine, and then use free-
motion sewing to sew the design.
11