Brother Laura Ashley Innov-ís NX2000 Operation Manual page 8

p
Install the needle plate cover and bobbin
cover with tabs.
For details on installing the needle plate cover,
refer to the machine's Operation Manual.
a
Needle plate cover
b
Bobbin cover with tabs
Note
• Two bobbin covers may be included, depending on
the country or region where this kit was purchased.
Use the bobbin cover with the same shape as the
bobbin cover included with your machine. The
bobbin cover with a shape different than that
included with your machine cannot be installed on
the machine.
CAUTION
• When creating bobbin work, use the bobbin cover
with tabs, otherwise the thread may become
tangled or the needle may break.
Note
• When installing the needle plate cover, do not allow
it to pinch the thread.
q
Install the flat bed attachment.
Note
• When installing the flat bed attachment, do not allow
it to pinch the thread.
• When the bobbin thread is replaced with a new one,
be sure to repeat the procedure from
"Preparing the Bobbin Thread", otherwise the lower
threading will not be done correctly.
→ This completes the upper and lower threading.
a
on
7