Chapter 1
Setting Up the ACE
Command
show banner motd
show bootvar
show clock
show login timeout
show terminal
For detailed information about the fields in the output from these commands, refer to the Cisco 4700 Series
Application Control Engine Appliance Command Reference.
Clearing NTP Statistics
To clear the NTP statistical information, use the following command from Exec mode:
Command
clear ntp statistics {all-peers | io | local |
memory}
OL-20823-01
Displaying or Clearing the ACE Setup Configuration and Statistics
Purpose
Displays the configured banner message (see the
Message-of-the-Day Banner"
Displays the BOOT environment variable settings (see the
BOOT Environment Variable"
Displays the current clock settings (see the
Date"
or the
"Configuring the Time Zone"
Displays the configured login time value (see the
Inactivity Timeout"
section).
Displays the console terminal settings (see the
Display Attributes"
section).
Purpose
Clears the NTP statistics and information.
The keywords are as follows:
all-peers—Clears I/O statistics for all peers
•
io—Clears I/O statistics for I/O devices
•
local—Clears I/O statistics for local devices
•
memory—Clears I/O statistics for memory
•
Cisco 4700 Series Application Control Engine Appliance Administration Guide
"Configuring a
section).
section).
"Setting the System Time and
sections).
"Configuring an ACE
"Configuring Terminal
"Setting the
1-37