Shared Storage Cabling - HP LC2000r - NetServer - 128 MB RAM Configuration Manual

Shared Storage Cabling

This part of the guide defines the allowable cabling configurations for clusters using the HP
NetServer LXr Pro and HP Rack Storage/8s. Only these cabling configurations and cables are
supported.
NOTES:
1. Configure cluster using 1 or 2
Rack Storage/8s.
2. Channel 0 and 1 of each NetRAID
Adapter for each Lxr Pro must be
connected together through the
Rack Storage/8 as shown in the
diagram. Do not cross channels.
3. The NetRAID Adapter may be
installed in Lxr Pro PCI slots P4-P6.
(The diagram depicts using slot P4.)
4. Cables between the servers and
shared storage must be D5957A Cluster
Adapters.
HP Microsoft Cluster Server with One NetRAID Adapter
NetRAID Ch. 0
NetRAID Ch. 0
4
NetRAID Ch. 1
NetRAID Ch. 1