Specifications
Voltage
Current
Maximum loop rating
Alarm output
Alarm duration
Cover tamper contacts
Rating
Operating temperature
Humidity
Pulse count
RFI immunity
Static Immunity
Lightning immunity
Detection range:
PI6000 Pet Immune
6000 High Density
Mounting
Dimensions:
Width
Depth
Height
Color
The unit should be connected to a UL Listed power supply or control unit
capable of providing a minimum of 4 hours standby power.
The equipment should be installed in accordance with NFPA 70.
The unit should be tested at least once a year.
Product Ordering
Model
Description
PI6000
40' x 40' PIR with 30 lb Pet Immune Lens, closed loop, with tamper
6000
35' x 35' PIR with High Density Lens, closed loop, with tamper
g
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
10 to 16VDC
14mA Typical 20mA max.
16 VDC, 50mA
Fail safe contacts-closed loop
Normally Closed (N.C.)
5 seconds ( ± 0.5 sec.)
Closed loop
16V, 50mA
14°F to 122°F (-10°C to 50°C)
5 to 95% non-condensing
Two-pulse or three-pulse
Greater than 10V/meter from 10 to
1000MHz
20 kV
2.4 kV, 1.2 joules max. energy
impulse, 100 usec duration on field
wiring
40' (12.2m) x 90°
35' (10.1m) x 90°
Flat wall or corner
3.05" (7.75cm)
1.90" (4.83cm)
2.68" (6.81cm)
White
GE Security
12345 SW Leveton Drive
Tualatin, OR 97062
Phone: 503-692-4052
Front View
2.68"
6.81cm
3.05"
7.75cm
Figure 7. Dimensions
USA & Canada: 800-547-2556
Technical Service: 800-648-7424
FaxBack: 800-483-2495
wm
Side View
1.90"
4.83cm
Listing
C-UL US
C-UL US
15480D / October, 2004