Paper alignment assembly removal
Remove the upper paper deflector assembly. See
1.
page
4-80.
Remove the inner paper deflector assembly. See
2.
page
4-48.
Release the input paper sensor from its mounting, and remove.
3.
Remove the left door.
4.
Remove the paper alignment assembly mounting screws (A).
5.
Locate the paper alignment assembly reference adjustment screw (B) through the left frame, and remove
6.
the screw.
Remove the paper alignment assembly.
7.
Note: Do the
"Paper alignment assembly adjustment" on page 4-3
Service Manual
4-70
"Upper paper deflector assembly removal" on
"Inner paper deflector assembly removal" on
B
when you reinstall the assembly.