Table of Contents
Advertisement
User attendance messages (continued)
Error
Sub
Primary message
code
code
Insert <tray>
Install Bin x
or Cancel Job
Install Duplex
or Cancel Job
Description/action
<tray>=Tray 1, Tray 2, Tray 3, Tray 4, or Tray 5.
The printer detects a tray needs to be inserted. The printer does not continue
until it detects the tray is inserted.
Note: This situation usually occurs when the tray is refilled during a job. To
refill a tray during a printing session, press
the output bin before refilling the tray.
The following actions may be taken:
• Insert the requested tray.
• Press
until Busy/Waiting displays. The following selections are
available:
- Cancel Job
- Reset Printer
- Reset Active Bin
If the message cannot be cleared, go to
or
check" on page 2-114
Bin x=Bin 1, Bin 2, or Bin 3.
This message is displayed when a paper handling option has been hot
unplugged. The printer requires the reinstallation of the option to print a page
which has been formatted by the interpreter before the option was removed.
The following actions may be taken:
• Install the option.
• Press
until Busy/Waiting displays. Select one of the following:
- Cancel Job
- Reset Printer
- Reset Active Bin
If the message cannot be cleared, go to
page
2-103.
This message is displayed when a duplex option has been hot unplugged.
The printer requires the reinstallation of the option to print a page which has
been formatted by the interpreter before the option was removed.
The following actions may be taken:
• Install the duplex option.
• Press
until Busy/Waiting displays. Select one of the following:
- Cancel Job
- Reset Printer
- Reset Active Bin
If the message cannot be cleared, go to
page
2-82.
and wait for pages to reach
"Paper size sensing service
"Input tray(s) service check" on page
"Input tray(s) service check" on
"Duplex option service check" on
Diagnostic information
2-103.
2-35
Advertisement
Table of Contents
