Toro 53765 - Outdoor Ecxtra Sprinkler Timer User Manual page 6

Timer Components
3 - Control Dial Positions (continued)
SEASON ADJUST
stations in a program to be simultaneously
increased or decreased in 10% increments.
SPECIAL FUNCTIONS
and timing features for pump operation.
RAIN DELAY
be delayed from 1 to 7 days.
– Shuts off and prevents all automatic and
OFF
manual watering activity.
4 - Program Select Switch – Three-position slide
switch used to select watering program A, B or C
during the programming procedures and manual
operation.
5 - Rain Sensor Control Switch – Controls the sensor
input circuit. Switch positions provided for sensor
circuit Enable and Disable (bypass).
6 - Rain Sensor Configuration Switch – Selects
either Normally Open or Normally Closed sensor
operation for the type of sensor installed.
7 - Sensor Connection Terminals – Snap-in wire
connector for (optional) Toro Rain Sensor.
8 - Valve Common Connection Terminal – Snap-in
wire connector for the valve common wire.
9- Pump/Master Valve Connection Terminal –
Snap-in wire connector for a pump start relay or
master valve.
4
– Enables the run time of all
– Provides optional control
– Enables all watering operations to
10 - Transformer Connection Terminals – Snap-in
connectors for the plug-in transformer wires.
11 - Plug-In 2- Zone Module – Each plug-in module
provides snap-in connectors for two zone control
valve power wires. Up to six modules (12 zones)
can in the installed in the outdoor timer model and
five modules (10 zones) in the indoor model.
12 - Time Pod Port – Accepts the (optional) ECXTRA
TM
Time Pod unit to transfer watering schedule data
from the Toro Computer Aided Scheduling software
program to the ECXTRA timer.
13 - Power Supply – A Plug-in transformer supplies
24 V a.c. power to the indoor controller models.
14 - Transformer – A built-in transformer supplies
24 V a.c. power to the outdoor controller models.
15 - Terminal Block – Connection terminals for
120 V a.c. power wires (Indoor model only).