Alignment and Troubleshooting
3) JAM 1
Description : 1. Recording paper is jammed in front of or inside the fuser.
2. Recording paper is stuck in the discharge roller and in the fuser just after
passing through the Actuator-Feed.
1. If the recording paper is
jammed in front of or inside the fuser.
Replace the SMPS.
(Perform DCU diagnostic
code 08)
2. If the recording
paper is stuck in the discharge
Reassemble the Actuator-Feed
roller and the fuser just after passing
and Spring-Actuator if the returning
through the Actuator-Feed, Feed
is bad.
Actuator may be
defective.
4-48
Service Manual