Changing The Level Of Card Support - Epson ActionNote 866C User Manual

The following table describes the card insertion parameters.
Card insertion parameters
Option
Beep on Card Insertion
Beep on Card Removal
Beep on Card Error
Beep in DOS
Beep in Windows

Changing the Level of Card Support

The CardLite option on the Configure pull-down menu
allows you to change the level of card support and the method
of card detection for your system.
Note
If you change these parameters, make sure you save the
settings by selecting
When you exit the CardLite Configuration Utility (from the
File menu), the program prompts you to save the changes to
the CARDLITE.INI and CONFIG.SYS files.
2-6 Using CardLite
Function
Beeps when a PC card is inserted
Beeps when a PC card is removed
Beeps when a PC card is inserted
and a configuration error occurs
Beeps in the MS-DOS environment
based on the card options
selected above
Beeps in the Windows environment
based on the card options
selected above
from the configuration screen.
OK